Cut-to-Size Black Acrylic Sheet - Cast 2025
Processing...

Cut-to-Size Black Acrylic Sheet - Cast 2025

Code: CUT-TO-SIZE-ACRYLIC-CAST-BLACK-SHEET-2025

Select your options and quantity to view pricing
Increasing quantity may qualify for a lower unit price

and
and

 

Options:

 

Holes Per Sheet ? Holes:

A dimensioned drawing or sketch with hole placement is required. Please indicate hole position as the distance from the center of the hole to the sheet edge. Please note that hole edges are not polished.

You will receive an email with further instructions upon receipt of your order.

There is a minimum order quantity of units. Please check your selection.
Minimum Order Quantity: Units
For Standard Size Black Acrylic Sheets Click Here
Select all options and quantity to request a quote

Choose from the options above to order custom cut-to-size Black Cast Acrylic Sheets-Cast 2025. Acme Plastics has a broad selection of stock sizes available. This option allows you to select just the size and dimensions you need without the need to purchase and store any excess. After dimensions are selected an updated price per custom sheet will be displayed.

Custom Edge & Polishing Information: 

We offer a variety of customization options and edge polishing methods for our acrylic sheets. For a glossier edge select an option with polished edges. Soften the edges of your acrylic sheets with beveled or rounded edges or radius/rounded corners. 

Have additional questions about any of these options? Contact our team at Acme Plastics for more information on our acrylic edge polishing and finishing options. 

Custom Hole Information: 

You can choose to add holes to your acrylic sheet. After entering your desired number of holes, select from the available hole sizes using the drop down menu above. 

Dimension Information:

Standard Cut-to-Size length and width tolerances are +/-1/8", but are typically more accurate. Please contact us if you need greater precision. Acrylic sheet thickness tolerances are +/- 10% and can vary throughout the sheet, but variations are typically less than 5%. Please refer to nominal and actual sheet thicknesses below.

1/8" = 3mm = 0.118"
3/16" = 4.5mm = 0.177"
1/4" = 5.5mm = 0.217"
3/8" = 9mm = 0.354"
1/2" = 12mm = 0.472"

Return Policy Information: 

Cut-to-size products are CUSTOM and therefore NON-RETURNABLE.

Write a Review
Customer Ratings & Reviews