Cut-to-Size White Styrene Sheet - High Impact
Processing...

Cut-to-Size White Styrene Sheet - High Impact

Code: CUT-TO-SIZE-WHITE-HIGH-IMPACT-STYRENE-SHEET

Select your options and quantity to view pricing
Increasing quantity may qualify for a lower unit price

and
and

 

Options:

 

Holes Per Sheet ? Holes:

A dimensioned drawing or sketch with hole placement is required. Please indicate hole position as the distance from the center of the hole to the sheet edge. Please note that hole edges are not polished.

You will receive an email with further instructions upon receipt of your order.

There is a minimum order quantity of units. Please check your selection.
Minimum Order Quantity: Units
For Standard Size White High Impact Styrene Sheets Click Here
Select all options and quantity to request a quote

Choose from the options above to order custom cut-to-size White High Impact Styrene Sheets.

High Impact Styrene Information: 

• Good machinability
• High impact strength
• Low moisture absorption
• Easy to print and paint on
• Outstanding thermoforming characteristics
• Easy to assemble with adhesives and solvents
• Superior air cushioning and static inhibiting surface

Acme Plastics has a broad selection of stock sizes available. This option allows you to select just the size and dimensions you need without the need to purchase and store any excess. After dimensions are selected an updated price per custom sheet will be displayed.

Radius Corner Information: 

Round off the 4 corners of your styrene sheet with our radius/rounded corner option. Select the radius you desire using the drop down menu above. 

Custom Hole Information: 

You can choose to add holes to your styrene sheet with our radius/rounded corner option. Select the radius you desire using the drop down menu above. 

Dimension Information:

Standard Cut-to-Size length and width tolerances are +/-1/8", but are typically more accurate. Please contact us if you need greater precision.

High Impact Styrene sheet thickness tolerances are +/- .003" and can vary throughout the sheet, but variations are typically less than 5%. Please refer to nominal and actual sheet thicknesses below.

0.06" = 1.5mm
0.08" = 2mm
0.09" = 2.3mm
0.098" = 2.5mm
1/8" = 3mm = 0.118"
3/16" = 4.5mm = 0.177"
1/4" = 5.5mm = 0.217"

Return Policy Information: 

Cut-to-size products are CUSTOM and therefore NON-RETURNABLE. 

Write a Review
Customer Ratings & Reviews