Sustainable Recycled PLEXIGLAS Clear Sheet proTerra

Sustainable Recycled PLEXIGLAS Clear Sheet proTerra


Select your options to view pricing.

Select Sheet Size:
There is a minimum order quantity of units. Please check your selection.
Minimum Order Quantity: Units
Don't see the options you need? Please email us at [email protected]
Select all options to
If you think durable acrylic glass sheets couldn't get any more positive reviews, meet PLEXIGLAS® proTerra, the recycled acrylic line of PLEXIGLAS® by Röhm, now available at Acme Plastics. Comprised of approximately 90-percent reused acrylic glass, this environmentally friendly material is available in always popular and multi-use, clear. The co-extruded material boasts impressive qualities. It has glass-like clarity, is impermeable to UV radiation, is weather-resistant, glossy on both surfaces, has low thickness tolerance, and is stronger and lighter than comparable glass products. Plus, it's easy to work with due to its processing versatility and handling – easy to glue, etc.

Eco-conscious and responsibly manufactured, PLEXIGLAS® proTerra at Acme Plastics, an environmentally friendly option to your acrylic sheet needs. Have a question? Contact us, we're here to assist you.

Dimension Information:
Please contact us if you have tighter dimension tolerance requirements than our standard tolerances listed below.
Due to manufacturing and cutting tolerances, sheet length and width may vary by +/- 1/4".
Cast clear acrylic sheet thickness tolerances are +/- 10% and can vary throughout the sheet, but variations are typically less than 5%. Please refer to nominal and actual sheet thicknesses below.
0.06" = 1.5mm
1/8" = 3mm = 0.118"
3/16" = 4.5mm = 0.177"
1/4" = 5.5mm = 0.217"
3/8" = 9mm = 0.354"
1/2" = 12mm = 0.472"
3/4" = 18mm = 0.709"
1" = 24mm = 0.945"
1.25" = 30mm = 1.18"
1.5" = 38mm = 1.50"
2" = 50mm = 1.97"
3" = 75mm = 2.95"
Write a Review
Customer Ratings & Reviews